== IEEE802.11h Protocol Implementation Conformance Statement (as of madwifi-lintrack-r970) ==

||'''SM1'''||Country, Power Constraint, and TPC Report elements included in Beacon and Probe Response frames||'''no'''/'''partial'''||mandatory||
||'''SM2'''||Spectrum Management Capability bit||'''incorrect'''||mandatory||
||'''SM3'''||Power Capability and Supported Channels elements in Association and Reassociation frames||'''no'''/'''partial'''||mandatory||
||'''SM4'''||Action frame protocol for spectrum management actions||'''no'''||mandatory||
||'''SM5'''||Measurement Requests||'''no'''||mandatory||
||'''SM6'''||Measurement Reports||'''no'''||mandatory||
||'''SM7'''||Quiet interval||'''no'''||mandatory||
||'''SM8'''||Association control based on spectrum management capability||'''no'''||mandatory for AP||
||'''SM9'''||Association control based on transmit power capability||'''no'''||mandatory for AP||
||'''SM10'''||Maximum transmit power Levels||'''partial''': only AP||mandatory||
||'''SM11'''||Selection of transmit power||'''partial''': only AP||mandatory||
||'''SM12'''||Adaptation of transmit power||'''no'''||optional*||
||'''SM13'''||Testing channels for radars||'''unknown'''**||mandatory||
||'''SM14'''||Detecting and discontinuing operations after detection of a radar||'''partial''': only AP / '''unknown'''**||mandatory||
||'''SM15'''||Requesting and reporting of measurements||'''no'''||mandatory||
||'''SM16'''||Autonomous reporting of radars||'''no'''||mandatory||
||'''SM17'''||Independent basic service set (IBSS) dynamic frequency selection (DFS), Element including channel map||'''no'''||mandatory for IBSS||
||'''SM18'''||DFS owner function||'''no'''||mandatory for IBSS||
||'''SM19'''||DFS owner recovery procedure||'''no'''||mandatory for IBSS||
||'''SM20'''||Channel switch procedure||'''yes''' (BSS only)||mandatory||

* TPC Report is mandatory, but it is already in SM1[[BR]]
** not tested

----

== IEEE 802.11d Protocol Implementation Conformance Statement (as of madwifi-lintrack-r970) ==


||'''MD1'''||Country Information Element||'''yes'''||mandatory||
||'''MD2'''||Inclusion of Request Information in the Probe Request frame||'''no'''||optional||
||'''MD3'''||Hopping pattern parameters||'''no'''||mandatory for 802.11b||
||'''MD4'''||Hopping Pattern Information||'''no'''||mandatory for 802.11b||
||'''MD5'''||Request Information Element||'''no'''||mandatory||
||'''MD5'''*||Entering a Regulatory Domain||'''no'''||mandatory||
||'''MD6'''||Determination of the Hopping Patterns||'''no'''||mandatory for 802.11b||
||'''MD7'''||Roaming requires Beacon frame with country information element||'''no'''||mandatory||
||'''MD8'''||Actions to be taken upon the receipt of the beacon||'''no'''||mandatory||
||'''MD9'''||Ignore improperly formed Request Information Element||'''no'''||optional||
||'''MD10'''||Hopping Pattern set attribute||'''no'''||mandatory for 802.11b||

* improper numbering in IEEE802.11d PICS Proforma

----

''In the future, PICS of other parts of the standard will be included here as well for detailed information about supported and tested functionality.''