IEEE802.11h Protocol Implementation Conformance Statement (as of madwifi-lintrack-r970)
| SM1 | Country, Power Constraint, and TPC Report elements included in Beacon and Probe Response frames | no/partial | mandatory |
| SM2 | Spectrum Management Capability bit | incorrect | mandatory |
| SM3 | Power Capability and Supported Channels elements in Association and Reassociation frames | no/partial | mandatory |
| SM4 | Action frame protocol for spectrum management actions | no | mandatory |
| SM5 | Measurement Requests | no | mandatory |
| SM6 | Measurement Reports | no | mandatory |
| SM7 | Quiet interval | no | mandatory |
| SM8 | Association control based on spectrum management capability | no | mandatory for AP |
| SM9 | Association control based on transmit power capability | no | mandatory for AP |
| SM10 | Maximum transmit power Levels | partial: only AP | mandatory |
| SM11 | Selection of transmit power | partial: only AP | mandatory |
| SM12 | Adaptation of transmit power | no | optional* |
| SM13 | Testing channels for radars | unknown** | mandatory |
| SM14 | Detecting and discontinuing operations after detection of a radar | partial: only AP / unknown** | mandatory |
| SM15 | Requesting and reporting of measurements | no | mandatory |
| SM16 | Autonomous reporting of radars | no | mandatory |
| SM17 | Independent basic service set (IBSS) dynamic frequency selection (DFS), Element including channel map | no | mandatory for IBSS |
| SM18 | DFS owner function | no | mandatory for IBSS |
| SM19 | DFS owner recovery procedure | no | mandatory for IBSS |
| SM20 | Channel switch procedure | yes (BSS only) | mandatory |
* TPC Report is mandatory, but it is already in SM1
** not tested
IEEE 802.11d Protocol Implementation Conformance Statement (as of madwifi-lintrack-r970)
| MD1 | Country Information Element | yes | mandatory |
| MD2 | Inclusion of Request Information in the Probe Request frame | no | optional |
| MD3 | Hopping pattern parameters | no | mandatory for 802.11b |
| MD4 | Hopping Pattern Information | no | mandatory for 802.11b |
| MD5 | Request Information Element | no | mandatory |
| MD5* | Entering a Regulatory Domain | no | mandatory |
| MD6 | Determination of the Hopping Patterns | no | mandatory for 802.11b |
| MD7 | Roaming requires Beacon frame with country information element | no | mandatory |
| MD8 | Actions to be taken upon the receipt of the beacon | no | mandatory |
| MD9 | Ignore improperly formed Request Information Element | no | optional |
| MD10 | Hopping Pattern set attribute | no | mandatory for 802.11b |
* improper numbering in IEEE802.11d PICS Proforma
In the future, PICS of other parts of the standard will be included here as well for detailed information about supported and tested functionality.
